2006 Aprilia Mx 125

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Fuel cap seal missing but plastic cap

Rear Shock absorber has a light misting of oil (5.3.2 (b))

slight wear to sprockets

Drive chain sprocket slightly worn (6.2.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust noisy (7.1.2)

Exhaust slightly deteriorated (7.1.1a)

bars slightly bent

fuel cap seal missing but plastic cap

l/h/front twist grip loose unable to fell off due to handguards fitted

rear pegs missing

speedo inop

unable to see front brake master cly level

Drive chain worn to excess (6.2.1e)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings are excessively rough (2.3.5b)

Rear Registration plate character(s) not correctly formed (6.3.4b)

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear suspension bush has excessive free play (2.4.A2a(i))

Drive chain excessively loose (6.2.1d) DANGEROUS

Front wheel bearings have excessive free play (2.3.5b) DANGEROUS

Rear Brake component defective due to a deliberate modification which significantly reduces the original strength caliper bracket (3.1.5) DANGEROUS

Drive chain sprocket slightly worn (6.2.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust noisy (7.1.2)

Exhaust slightly deteriorated (7.1.1a)

bars slightly bent

fuel cap seal missing but plastic cap

headlight poor condition inside

l/h/front twist grip loose unable to fell off due to handguards fitted

rear number plate light missing

rear pegs missing

unable to see front brake master cly level

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp deteriorated and function impaired (1.2.3a)

Horn not loud enough to be heard by another road user (1.7.3a)

Nearside Direction indicator not working (1.5.1c)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Rear suspension bearing has excessive free play (2.4.A2a(i))

Stop lamp affected by the operation of another lamp (1.3.2)

Brake lever is short but brake can still be readily applied (3.1.3c)

Clutch lever bent (6.2.1g)

Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Clutch lever bent (6.2.1g)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Horn not loud enough to be heard by another road user (1.7.3a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear suspension bush has slight free play (2.4.A2a(i))

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front position lamp insecure (1.1.1c)

Front wheel bearings are excessively rough (2.3.5b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear suspension bush has slight free play (2.4.A2a(i))

Offside Steering lock stop ineffective (2.1.3)

Registration plate delaminated (6.3.1.d)

Rear suspension bush has slight free play (2.4.A2a(i))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Direction indicators affected by the operation of another lamp (1.5.1c)

Rear Rear position lamp adversely affected by the operation of another lamp (1.1.3b)

no odomiter

Chain & sprockets worn

Steering movement 'notchy'

Rear wheel bearings have excessive free play (2.4.A.2c)

Chain & sprockets worn

Steering movement 'notchy'

Clutch lever positioned so it cannot be readily operated. (6.2.1g)

Headlamp aim too high and too far to the left. (1.6)

Indicator switch insecure (1.5.4)

Nearside Handlebar handgrip missing (2.1.1c)

Registration plate missing (6.3.1a)

Front Stop lamp remains on when the brake is released (1.3.1e)