2007 Kawasaki ZZR1400

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Offside Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Exhaust has a major leak of exhaust gases Silencer loose and gasket missing (6.1.2 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Tyre worn close to the legal limit Front 120/70-ZR17 Pilot Rd 2 worn down to 1.1mm (5.2.3 (e))

Rear Tyre tread depth is below minimum requirements of 1.0mm 190/50-ZR17 Pilot Rd2 (5.2.3 (e)) DANGEROUS

Tyre worn close to the legal limit Front 120/70-ZR17 Pilot Rd 2 worn down to 1.1mm (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Wheel more than one fixing missing WHEEL SPINDLE NUT LOCKING PIN/CLIP MISSING (5.2.1 (a) (ii)) DANGEROUS

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened both scored (1.1.14 (a) (ii))

oil leak from rocker cover ?

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Steering movement slightly stiff (2.2.1a)

Nearside Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear suspension bush has slight free play (2.4.A2a(i))

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear suspension bush has slight free play (2.4.A2a(i))