2009 Yamaha Wr 125 X

All direction indicators not working (4.4.1 (a) (ii))

Horn not working (7.7 (a))

Rear reflector missing (4.8.2 (a) (ii))

Stop lamp not working (4.3.1 (a) (ii))

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Stop lamp not working (4.3.1 (a) (ii))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Tyre incorrect because a bias-belted tyre is fitted to the front and a cross-ply tyre is fitted to the rear (5.2.3 (a))

Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii))

Rear Brake binding but not excessively (1.2.1 (f))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Chain guard missing ()

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly 'notchy' (2.2.1b)

Nearside Rear Direction indicators flashing less than 60 times a minute remains illuminated does not flash (1.5.1c)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Drive chain worn to excess (6.2.1e) DANGEROUS

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d) DANGEROUS

Chain guard missing ()

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly 'notchy' (2.2.1b)

Drive chain slightly tight (6.2.1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Drive chain excessively tight (6.2.1d)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Drive chain excessively loose (6.2.1d) DANGEROUS

Rear shock absorber has inadequate damping effect. (2.4.A.3b) DANGEROUS

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a) DANGEROUS

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Brake lever pivots slightly worn (3.1.3a)

Rear Wheel spoke slightly corroded. (4.2.1b)

brake hoses in sleeves

front tyre splitting in sidewall

handle bars bent

n/s front indicator no lens

rear reg plate poor cond

Front Roller brake test indicates a binding brake (3.3.A1a)

Brake lever pivots slightly worn (3.1.3a)

Rear Wheel spoke slightly corroded. (4.2.1b)

brake hoses in sleeves

front tyre splitting in sidewall

handle bars bent

n/s front indicator no lens

rear reg plate poor cond