MOT Status
ValidMileage
116,531 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Nail in tyre ()
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Nail in tyre ()
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
windscreen has crack,but does not detract from drivers view
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Audi A5?
Based on 1,497,195 MOT tests across 148,987 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PN10 UHC is a 2010 Audi A5 in Grey with a 1,968cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2010 Audi A5 models, the average MOT pass rate is 80.9% with a typical mileage of 82,794 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Audi A5 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 17,175 recorded failures. If you're considering buying PN10 UHC, it's worth having these areas checked by a mechanic before committing.
The Audi A5 typically stays on UK roads for around 19 years. At 16 years old, this Audi A5 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PN10 UHC?
You can check the full history of PN10 UHC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PN10 UHC registered?
PN10 UHC is a 2010 Audi A5, first registered on 9 April 2010.
Is PN10 UHC safe to buy?
The MOT history for PN10 UHC shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PN10 UHC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PN10 UHC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.