MOT Status
ValidMileage
146,936 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point chassis (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point chassis (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Front Inner Play in steering rack inner joint(s)
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Play in steering rack inner joint(s)
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
little reserve travel on park brake
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Rear Reversing lamp inoperative (4.6.1 (a))
Nearside Front Inner Play in steering rack inner joint(s)
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Play in steering rack inner joint(s)
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
little reserve travel on park brake
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))
little reserve travel on park brake
Headlamp levelling device inoperative (4.1.5 (a))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive Wing (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting Crossmember (6.1.6 (i) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting crossmember (6.1.6 (i) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting crossmember (6.1.6 (i) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Direction indicator incorrect colour (1.4.A.2f)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Zero emissions detected
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PN12 CXM is a 2012 Mercedes-benz Vito in Silver with a 2,143cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2012 Mercedes-benz Vito models, the average MOT pass rate is 75.3% with a typical mileage of 113,200 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying PN12 CXM, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 14 years old, this Mercedes-benz Vito is still in the earlier part of its expected life.
Frequently Asked Questions
How do I check the history of PN12 CXM?
You can check the full history of PN12 CXM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PN12 CXM registered?
PN12 CXM is a 2012 Mercedes-benz Vito, first registered on 25 April 2012.
Is PN12 CXM safe to buy?
The MOT history for PN12 CXM shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PN12 CXM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PN12 CXM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.