2001 Toyota Yaris

handbrake lever travel

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner & outer sills (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii)) DANGEROUS

handbrake lever travel

engine very noisy

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside front brake excessively fluctuating (3.7.B.3)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

front brake application uneven (3.7.B.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

engine very noisy

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc modified but not seriously weakened (3.5.1n)

front anti roll bar bushes slightly deteriorated

front brakes binding slightly

front tyres worn on edges

Fuel cap/sealing device missing (7.2.4a)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc modified but not seriously weakened (3.5.1n)

front anti roll bar bushes slightly deteriorated

front brakes binding slightly

front tyres worn on edges

Centre Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Fuel cap/sealing device missing (7.2.4a)

Nearside Lower Suspension spring mounting prescribed area is excessively corroded outer sill along its length and is holed. (2.4.A.3)

Nearside Rear coil spring broken (2.4.C.1a)

Nearside front brake binding (3.7.B.1)

Offside Lower Suspension spring mounting prescribed area is excessively corroded outer sill along its length and is holed. (2.4.A.3)

Offside front brake binding (3.7.B.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front tyre is worn around inner and outer tread.

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre(s) incorrect because a lightweight or space saving wheel is fitted (4.1.A.1b)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Bonnet cannot be secured in the closed position (8.4.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Front brake disc slightly pitted (3.5.1h)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front anti roll bar drop link bushs deteriorating

front brake discs coroding

n/s/f inner road wheel flat spotted