MOT Status
ExpiredMileage
81,652 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Vehicles internal headlight adjuster altered to recheck lights ()
Central Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Front Anti-roll bar linkage has slight play in a ball joint both (2.4.G.2)
Nearside Front tyre is cracked but not deep enough to expose ply or cords
Parking brake lever has little reserve travel (3.1.6b)
the underside of the vehicle has corrosion present to most areas including chassis, subframe,brake pipes and hoses, steering and suspension components
Nearside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch/sill (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch/sill (2.4.A.3)
Front Anti-roll bar linkage has slight play in a ball joint both (2.4.G.2)
Nearside Front tyre is cracked but not deep enough to expose ply or cords
Parking brake lever has little reserve travel (3.1.6b)
the underside of the vehicle has corrosion present to most areas including chassis, subframe,brake pipes and hoses, steering and suspension components
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Front Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Items removed from driver's view prior to test
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear section exhaust, deteriorated.
Items removed from driver's view prior to test
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Obligatory mirror insecure (8.1.1)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear section exhaust, deteriorated.
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Supplementary Restraint System warning lamp does not illuminate (5.4.2)
battery possible leak
nearside front tyre outer sidewall is deteriorated
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Items removed from driver's view prior to test
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
battery possible leak
nearside front tyre outer sidewall is deteriorated
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Direction indicator damaged, but still visible from a reasonable distance (1.4.A.2e)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Vehicle's internal headlight adjuster altered to recheck lights
exhaust rear joint is deteriorated
Nearside Rear Direction indicator damaged, but still visible from a reasonable distance (1.4.A.2e)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Vehicle's internal headlight adjuster altered to recheck lights
exhaust rear joint is deteriorated
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
offside front tyre wearing outer shoulders
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PN51 UKV is a 2001 Mazda 323 in Silver with a 1,324cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2001 Mazda 323 models, the average MOT pass rate is 71.0% with a typical mileage of 68,232 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying PN51 UKV, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 25 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of PN51 UKV?
You can check the full history of PN51 UKV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PN51 UKV registered?
PN51 UKV is a 2001 Mazda 323, first registered on 13 September 2001.
Is PN51 UKV safe to buy?
The MOT history for PN51 UKV shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PN51 UKV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PN51 UKV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.