2001 Toyota Yaris

Coil spring corroded offside and nearside front (5.3.1 (b) (i))

Coil spring corroded offside and nearside rear (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Side repeater lens defective which has no effect on emitted light offside and nearside (4.4.1 (b) (i))

Subframe mounting prescribed area is corroded but not considered excessive offside and nearside rear (5.3.6 (a) (i))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Coil spring corroded offside and nearside front (5.3.1 (b) (i))

Coil spring corroded offside and nearside rear (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Registration plate lamp insecure (4.7.1 (c) (i))

Side repeater lens defective which has no effect on emitted light offside and nearside (4.4.1 (b) (i))

Subframe mounting prescribed area is corroded but not considered excessive offside and nearside rear (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Headlamp has a product on the lens but not seriously reducing light output offside and nearside (4.1.4 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Registration plate lamp insecure (4.7.1 (c) (i))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Registration plate lamp insecure (4.7.1 (c) (i))

nearside side repeater lens is missing

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Registration plate lamp insecure (4.7.1 (c) (i))

nearside side repeater lens is missing

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

front and rear tyres cracking on tred

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Outer Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside rear brake binding (3.7.B.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

offside rear wheel is slightly stiff to rotate

Windscreen washer provides insufficient washer liquid (8.2.3)

offside rear wheel is slightly stiff to rotate

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

advise cant see front brake pads clearly ok on brake tester

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)