2004 Isuzu Trooper Duty Dt SWB

Brake master cylinder/servo mounting prescribed area is damaged but not considered excessive (1.1.21 (e) (i))

Front Anti-roll bar ball joint has slight play both (5.3.4 (a) (i))

Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

axle rust

wheel arch corroded

Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Rear Suspension arm attachment bracket/mounting corroded and seriously weakened Panhard bar (5.3.3 (b) (i))

Brake hose has slight corrosion to ferrule all hoses (1.1.12 (f) (i))

Central Rear Upper Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Front Tyre slightly damaged/cracking or perishing both fronts perished (5.2.3 (d) (ii))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Nearside Front Inner wheel arch corroded

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Steering box leaking oil (2.1.1 (e) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp aim too low (4.1.2 (a))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity (4.2.3 (b) (ii))

Offside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity (4.2.3 (b) (ii))

Power steering pump has slight seepage (2.1.5 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced Overall corrosion but none considered excessive (6.1.1 (c) (i))

Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity New reflector slightly overlapping light and reducing light output (4.2.3 (b) (ii))

O/S and N/S front body mounting bushes worn/perished.

Offside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Power steering pump has slight seepage (2.1.5 (a))

Undertrays and plastic sill covers fitted and not allowing full inspection.

Vehicle structure is corroded but structural rigidity is not significantly reduced Overall corrosion on both body and chassis, none considered excessive (6.1.1 (c) (i))

Front body mountings corroded

Nearside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides inner and outer sills plastic covers fitted not allowing full inspection (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

mil light on

Emissions not tested (8.2.2.2 (e))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Front body mountings corroded

Nearside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides inner and outer sills plastic covers fitted not allowing full inspection (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

mil light on

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Brake pipe slightly corroded both (3.6.B.2c)

Brake pedal anti-slip provision missing (3.3.A.1b)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Brake pipe slightly corroded both (3.6.B.2c)

Rear Brake pipe slightly corroded both (3.6.B.2c)

slight corrosion to underside of vehicle

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Brake pipe slightly corroded both (3.6.B.2c)

slight corrosion to underside of vehicle

Front Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Stop lamp not working (1.2.1b)

Rear Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)