MOT Status
ExpiredMileage
104,528 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner wheel arches (7.1.1 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement both front cracking (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive chassis and cross members (5.3.6 (a) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner wheel arches (7.1.1 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement both front cracking (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive chassis and cross members (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive front and rear cross members (5.3.6 (a) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both outer sills at rear (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive front and rear cross members (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))
Front undertray fitted,not allowing full inspection
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))
Front undertray fitted,not allowing full inspection
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
mid exhaust flange deteriorated
Front Brake pad(s) wearing thin (3.5.1g)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Items removed from driver's view prior to test ()
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Windscreen wiper does not clear the windscreen effectively both (8.2.2)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
both front tyres worn on tread edges
both front tyres starting to wear on tread
How Reliable is the Daihatsu Terios?
Based on 225,773 MOT tests across 14,965 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PN55 MVL is a 2005 Daihatsu Terios in Silver with a 1,298cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 71.4%.
Across all 2005 Daihatsu Terios models, the average MOT pass rate is 74.7% with a typical mileage of 57,601 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Daihatsu Terios fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 7,214 recorded failures. If you're considering buying PN55 MVL, it's worth having these areas checked by a mechanic before committing.
The Daihatsu Terios typically stays on UK roads for around 29 years. At 21 years old, this Daihatsu Terios is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of PN55 MVL?
You can check the full history of PN55 MVL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PN55 MVL registered?
PN55 MVL is a 2005 Daihatsu Terios, first registered on 12 September 2005.
Is PN55 MVL safe to buy?
The MOT history for PN55 MVL shows 21 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PN55 MVL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PN55 MVL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.