2005 Subaru Forester

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Sub-frame is corroded but structural rigidity is not significantly reduced rear sub frame has a weld repair to the n/s/r and covered with sealer (6.1.1 (c) (i))

Rear rear diff support beam bushes slightly worn

Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both sides (5.3.6 (a) (ii)) DANGEROUS

Driver's view of the road through the swept area of the windscreen materially affected by an obstruction (3.1 (a) (ii))

Emissions not tested (8.2.1.2 (d))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame corroded (5.3.6 (a) (i))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive sub frame corroded (5.3.6 (a) (i))

EXHAUST SYSTEM CORRODED

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre slightly damaged/cracking or perishing cracking/perishing (5.2.3 (d) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Tyre slightly damaged/cracking or perishing cracking/perishing (5.2.3 (d) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust system corroded

Front brake disc worn, pitted or scored, but not seriously weakened Both (3.5.1i)

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Bumper mountings excessively corroded

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (2.4.A.3)

Rear Bumper Damaged

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill (2.4.A.3)

Exhaust system corroded

Front brake disc worn, pitted or scored, but not seriously weakened Both (3.5.1i)

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Bumper mountings excessively corroded

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (2.4.A.3)

Rear Bumper Damaged

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

offside rear brake binding slightly

Power steering component(s) leaking from a failed seal (2.3.3b)

rear registration plate starting to delaminate along upper edge

Offside Headlamp aim too high and too far to the right. (1.8)

rear registration plate starting to delaminate along upper edge