2008 Ford Ka

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor by axle monting (6.2.2 (d) (i))

Offside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i))

Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch x2 (6.2.2 (d) (i))

Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush so worn or insecure that directional stability is impaired (5.1.2 (b) (ii)) DANGEROUS

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Rear Bumper insecure (6.1.4 (a) (i))

Windscreen damaged and affecting the driver's view of the road (3.2 (a) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc's very heavily worn.

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Front suspension has slight play in a pin or bush of an lower wishbone inner bearing slight deterioration in bonding. (2.5.B.1a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords very heavily scrubbed. (4.1.D.1a)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear position lamp(s) not working (1.1.A.3b)

Stop lamp not working BOTH outer. o/s/r lamp unit lense broken, white light to rear. (1.2.1b)

Tyre not fitted in accordance with side wall instructions BOTH REAR. (4.1.D.1f)

Offside Front coil spring broken (2.4.C.1a) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc's very heavily worn.

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Front suspension has slight play in a pin or bush of an lower wishbone inner bearing slight deterioration in bonding. (2.5.B.1a)

exhaust heat shielding loose. ( rattle )

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Exhaust system not adequately supported front flexible joint broken (7.1.1)

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre has ply or cords exposed tyre side wall deteriated cracked to cords (4.1.D.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

o/s/f wheel slight buckle

spare tyre different size

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Rear Registration plate lamp not working (1.1.C.1d)

o/s/f wheel slight buckle

spare tyre different size

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)