2013 Fiat Doblo

Items removed from driver's view prior to test

Rear Exhaust mounting defective (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Horn not working (7.7 (a))

Nearside Body component damaged and likely to cause injury mirror cover (6.2.1 (a) (i))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Body component damaged and likely to cause injury mirror cover (6.2.1 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Service brake efficiency below requirements (1.2.2 (a) (i))

Engine mounting bracket missing securing nut missing (6.1.8 (a) (ii)) DANGEROUS

Items removed from driver's view prior to test

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bushes split and de-laminated (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bushes split and de-laminated (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. offside brake reading slightly low (1.2.1 (b) (i))

all brake pipes covered in grease

headlamp lens becoming cloudy

parking brake travel only just meeting requirement

rear rubber exhaust mounting missing

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Gearbox mounting defective

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear light lens cracked

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front fog light missing

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

slack in hand brake

Nearside Rear tyre side wall very scrubbed

Offside Rear Tyre slightly damaged/cracking or perishing cracking between tread (5.2.3 (d) (ii))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Rear Exhaust system insecure rubber mount split (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge very close to limit (5.2.3 (e))

Nearside Rear tyre side wall very scrubbed

Offside Front Tyre worn close to legal limit/worn on edge very close to limit (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing cracking between tread (5.2.3 (d) (ii))

slight hand brake travel

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Day running light inop

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Nail in tyre

Offside Rear Tyre worn close to the legal limit (4.1.E.1)