2015 Yamaha XC

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

centre stand poor cond

temp repair rear light

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake lever has restricted free movement no reserve travel (1.1.15 (e))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

centre stand poor cond

temp repair rear light

Front tyre splitting.

Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear brake lever has limited reserve travel.

Wheel alignment slightly misaligned (2.4 (a))

Front Brake binding but not excessively (1.2.1 (f))

switch for side stand insecure

Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))

Rear Tyre not fitted in accordance with side wall instructions flat (5.2.3 (i))

Front Brake binding but not excessively (1.2.1 (f))

switch for side stand insecure

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp aim too low (4.1.2 (a))

Position lamp switch insecure (4.2.2 (b))

Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))

Stop lamp not working (4.3.1 (a) (ii))

Throttle control functioning such that safe operation of the motorcycle is adversely affected insecure (6.2.7 (a) (ii)) DANGEROUS

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Stop lamp remains on when the brakes are released when rear brake is applied. (4.3.2 (a) (iii)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

fairings/trims insecure

Front Brake excessively binding (1.2.1 (f))

Headlamp aim too low (4.1.2 (a))

Headlamp insecure (4.1.1 (c))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake pivot excessively worn (1.1.15 (b))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Stop lamp not working rear lever (4.3.1 (a) (ii))

Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Wheel bearing so rough it is likely to overheat or break up front and rear wheel bearings not checked due to binding brakes (5.1.3 (b) (ii)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

fairings/trims insecure

Front Brake excessively binding (1.2.1 (f))

Stop lamp not working (4.3.1 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake lever worn, but not excessively (1.1.15 (b))

n/s mirror cracked