MOT Status
ExpiredMileage
246,381 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Drive shaft joint constant velocity boot severely deteriorated both sides (6.1.7 (g) (i))
Front Headlamp lens slightly defective both sides (4.1.1 (b) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
all four wheel arches corroded
all under body corroded
inner and outer sills corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Offside Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Sub-frame corroded but not seriously weakened sub frame (5.3.3 (b) (i))
Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security to back slightly corroded/ under sealed (6.2.2 (d) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner and outer wheel arch/under sealed (5.3.6 (a) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security to back slightly corroded/ under sealed (6.2.2 (d) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer wheel arch/under sealed (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive rear wishbone (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive front to back inner and outer sill slightly corroded/under sealed (5.3.6 (a) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security to back slightly corroded/ under sealed (6.2.2 (d) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner and outer wheel arch/under sealed (5.3.6 (a) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security to back slightly corroded/ under sealed (6.2.2 (d) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer wheel arch/under sealed (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive rear wishbone (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive front to back inner and outer sill slightly corroded/under sealed (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassi leg (6.1.1 (c) (i))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger x2 (6.1.1 (c) (i))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassi leg (6.1.1 (c) (i))
Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Oil leak ()
both inner sills undersealed
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Horn not working (1.6.2a)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Oil leak
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Engine covers fitted obscuring some components in the engine bay
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Outer Body has slight corrosion (6.1.B.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Outer Body has slight corrosion (6.1.B.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Side repeater slightly discoloured (1.4.A.2f)
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Nearside Inner Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Inner Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Horn not working (1.6.2a)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Inner Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Inner Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Under-trays fitted obscuring some underside components
Horn not working (1.6.2a)
Nearside Stop lamp not working (1.2.1b)
Offside Front All position lamps not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.5c)
Direction indicators not working (1.4.A.2c)
Nearside Headlamp aim too high (1.8)
Nearside Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Registration plate lamp not working (1.1.5c)
Offside Registration plate lamp not working (1.1.5c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PO51 ZFK is a 2002 Mercedes-benz Vito in White with a 2,151cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying PO51 ZFK, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PO51 ZFK?
You can check the full history of PO51 ZFK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PO51 ZFK registered?
PO51 ZFK is a 2002 Mercedes-benz Vito, first registered on 7 February 2002.
Is PO51 ZFK safe to buy?
The MOT history for PO51 ZFK shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PO51 ZFK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PO51 ZFK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.