2003 Kymco Stryker Trail

Front Brake pad(s) close to minimum limit (1.1.13 (a))

No indicators fitted at time of test.

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

no indicators fitted at time of test

rear tyre cracked

All direction indicators not working (4.4.1 (a) (ii))

Central Fuel cap ineffective (6.1.3 (b) (i))

Front Headlamp insecure (4.1.1 (c))

Rear Brake component inadequately mounted (1.1.21 (c))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

no front mudguard

Front Wheel spoke slightly corroded (5.2.2 (d))

Rear Wheel spoke slightly corroded (5.2.2 (d))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))

Nearside Rear Rear reflector missing (4.8.2 (a) (ii))

Rear Drive chain excessively loose (6.1.7 (c) (i))

Rear Drive chain worn to excess (6.1.7 (c) (i))

Rear Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Drive chain sprocket so worn it is likely to fail x 2 off (6.1.7 (c) (ii)) DANGEROUS

Central Rear Lower Suspension arm ball joint worn, but not excessively main bush (5.3.4 (a) (i))

Offside Front mirror poor repair

Offside Rear silencer blowing slightly

Bike has a reflector fitted to the offside of the bike, but there as a built in reflector that is central in the tail light.

Rear Wheel alignment slightly misaligned. (2.5.1)

Clutch lever shortened. (6.2.1g)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim not tested (1.6)

Nearside Front Direction indicator not working (1.5.1c)

Nearside Rear Direction indicator not working (1.5.1c)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Clutch lever shortened. (6.2.1g)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Drive chain worn to excess (6.2.1e)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Nearside Drive chain sprocket worn to excess (6.2.1e)

Clutch lever shortened. (6.2.1g)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Centre Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) is slightly distorted (3.2.A1m)

Front Tyre Tread Slightly Cracked

Centre Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) is slightly distorted (3.2.A1m)

Front Tyre Tread Slightly Cracked

Rear reflector on motorcycle missing (1.4.1)

Drive chain worn to excess (6.2.1e)

Front Drive chain sprocket worn to excess (6.2.1e)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Horn not loud enough to be heard by another road user (1.7.3a)

Nearside Direction indicator affected by the operation of another lamp (1.5.1c)

Offside Direction indicator affected by the operation of another lamp (1.5.1c)

Offside Front Footrest insecure (6.2.1a)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

rear shock heavy damping