2003 Aprilia RS125

Front Front shock absorber has light misting of stanchion (2.3.3)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain excessively loose (6.2.1d)

Rear Registration plate delaminated (6.3.1.d)

Front Front shock absorber has light misting of stanchion (2.3.3)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Drive chain excessively loose (6.2.1d)

Drive chain sprocket carrier worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front wheel bearings are excessively rough (2.3.5b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Front Direction indicator incorrect colour (1.5.1b)

Nearside Rear Direction indicator incorrect colour (1.5.1b)

Offside Front Direction indicator incorrect colour (1.5.1b)

Offside Handlebar mounting clamp loose (2.1.1a)

Offside Rear Direction indicator not working (1.5.1c)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Steering damper insecure (2.1.2d)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

rear seat cowl insecure

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Direction indicator missing (1.5.1a)

Drive chain worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Headlamp aim too low (1.6)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Drive chain worn but not considered excessive (6.2.1e)