2004 Yamaha Jog R

Headlamp not working on main beam (4.1.1 (a) (ii))

Horn sound not in accordance with requirements (7.7 (c))

Position lamp switch does not operate in accordance with the requirements (4.2.2 (a))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Exhaust noisy (8.1.1 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

lower fairing missing

Rear Footrest missing (6.2.12 (a))

Stop lamp not working front and rear brakes (4.3.1 (a) (ii))

Exhaust noisy (8.1.1 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

lower fairing missing

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

very slight interaction with rear lights

centre stand not returning fully and slightly worn on pivot

Headlamp aim too high (1.6)

centre stand not returning fully and slightly worn on pivot

Front Headlamp insecure (1.2.3b)

Rear Brake performance not tested (3.3)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

rear reg bulb in-op

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre worn close to the legal limit (4.1.3(i))

Steering headbearing has slight free play (2.2.2)

Headlamp main beam warning lamp not working

Direction indicators flashing less than 60 times a minute (1.5.1c)

Front Brake hose excessively kinked (3.2.B3a)

Front Brake performance not tested (3.3)

Headlamp aim too low (1.6)

Rear Brake performance not tested (3.3)

Rear Registration plate insecure (6.3.1b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp main beam warning lamp not working

Rear mudguard insecure