2008 Tgb 202

Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Front Tyre worn close to the legal limit cracking across tread (5.2.3 (e))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

little reserve travel on lever

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Front Tyre worn close to the legal limit cracking across tread (5.2.3 (e))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

little reserve travel on lever

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear brake lever has limited reserve travel.

Front Brake lever worn, but not excessively (1.1.15 (b))

Front Forks slightly corroded (2.2.2 (d) (i))

Front tyre starting to crack

Rear Brake lever worn, but not excessively (1.1.15 (b))

Rear tyre starting to crack

handle bar grip slightly loose

slight play in head bearings

Front brake hose insecure.

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Fuel cap ineffective could not be opened to inspect (6.1.3 (b) (i))

Headlamp aim too high (4.1.2 (a))

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front brake hose insecure.

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Brake hose in sleeves not allowing a full inspection of hose.

Brake lever pivots slightly worn both (3.1.3a)

Rear Tyre worn close to the legal limit (4.1.3(i))

Registration plate cracked but still readable.

Slight bind on front brake.

Front Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Headlamp aim too low (1.6)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Brake hose in sleeves not allowing a full inspection of hose.

Brake lever pivots slightly worn both (3.1.3a)

Rear Tyre worn close to the legal limit (4.1.3(i))

Registration plate cracked but still readable.

Slight bind on front brake.

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Nearside Front Front suspension assembly slightly corroded. (2.3.1)

Offside Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Offside Front Front suspension assembly slightly corroded. (2.3.1)

Nearside Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Nearside Front Front suspension assembly slightly corroded. (2.3.1)

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Offside Front Front suspension assembly slightly corroded. (2.3.1)

rear reg plate split

Centre Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Centre Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Nearside Front Front suspension assembly slightly corroded. (2.3.1)

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Offside Rear Exhaust slightly deteriorated (7.1.1a)

rear reg plate split

Front Brake lever pivots slightly worn (3.1.3a)

Rear Brake lever pivots slightly worn (3.1.3a)

no mirrors at time oftest