2012 Ccm 404DS

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Offside Front Direction indicator lens defective which has no effect on emitted light Cracked (4.4.1 (b) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Offside Front Direction indicator lens defective which has no effect on emitted light Cracked (4.4.1 (b) (i))

Front Brake lever is bent but brake can still be readily applied Damaged. (1.1.2 (d))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Offside Front Direction indicator lens defective which has no effect on emitted light Cracked (4.4.1 (b) (i))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Front Brake lever is bent but brake can still be readily applied Damaged. (1.1.2 (d))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Offside Front Direction indicator lens defective which has no effect on emitted light Cracked (4.4.1 (b) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Registration plate does not conform to the specified requirements (0.1 (d))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Direction indicator light intensity significantly reduced (4.4.3 (a))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Tyre incorrectly seated on the wheel rim (5.2.3 (k))

Shock absorber has a serious fluid leak both fork seals (5.3.2 (b))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Drive chain slightly tight (6.1.7 (k) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Steering linkage locking device ineffective steering stop insecure (2.1.3 (d))

Offside Upper Motorcycle structure joining/attachment plate or fastening insecure subframe bolt insecure (6.1.1 (b) (i))

Rear Brake fluid contaminated (1.8 (a))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Exhaust noisy (7.1.2)

Front shock absorber has light misting of stanchion both (2.3.3)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Exhaust noisy (7.1.2)

Front shock absorber has light misting of stanchion both (2.3.3)

Exhaust noisy (7.1.2)

Headlamp mask/converter fitted

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Wheel alignment slightly misaligned. (2.5.1)

Front Wheel damaged significantly reducing the original strength (4.2.1a)

Exhaust noisy (7.1.2)

Front wheel bearings are slightly rough (2.3.5b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Wheel alignment slightly misaligned. (2.5.1)

Exhaust noisy (7.1.2)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear reflector on motorcycle missing (1.4.1)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Exhaust noisy (7.1.2)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)