MOT Status
ExpiredMileage
143,709 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Rear Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
rear parking (secondary) brakes imbalanced (3.7.B.6b)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
rear exhaust hanging brackets corroded off, exhaust secured with wire
underside of vehicle and suspension and steering components badly corroded
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PV55 EOG is a 2005 Mazda 6 in Grey with a 1,999cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 71.4%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying PV55 EOG, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PV55 EOG?
You can check the full history of PV55 EOG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PV55 EOG registered?
PV55 EOG is a 2005 Mazda 6, first registered on 30 December 2005.
Is PV55 EOG safe to buy?
The MOT history for PV55 EOG shows 14 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PV55 EOG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PV55 EOG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.