2009 Yamaha Yzf R125

Drive chain slightly tight (6.1.7 (k) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Throttle operating incorrectly (6.2.7 (a) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Valve stem slightly damaged (5.2.3 (j))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Valve stem slightly damaged (5.2.3 (j))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Valve stem slightly damaged (5.2.3 (j))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Valve stem slightly damaged (5.2.3 (j))

Rear reflector missing (4.8.2 (a) (ii))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Stop lamp not working (4.3.1 (a) (ii))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Nearside Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) DANGEROUS

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front shock absorber seal failed and leaking oil (2.3.3)

Rear reflector on motorcycle missing (1.4.1)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Drive chain slightly loose (6.2.1d)

Front Brake disc(s) is slightly distorted (3.2.A1m)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))