2009 Peugeot 107

Axle swivel pins and bushes swivel pin and/or bush slightly worn both side (5.1.2 (b) (i))

Coolant leak water pump ()

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material both side (1.1.11 (c))

Rear Suspension component corroded but not seriously weakened axle (5.3.3 (b) (i))

Axle swivel pins and bushes swivel pin and/or bush slightly worn both side (5.1.2 (b) (i))

Coolant leak water pump ()

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material both side (1.1.11 (c))

Rear Suspension component corroded but not seriously weakened axle (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Inner Road wheel slightly distorted bead rim dented (5.2.2 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 155/65x14 inner edge wearing unevenly and wearing low - advise replacement. (5.2.3 (e))

Offside Rear Direction indicator lens defective which has no effect on emitted light lens holed (4.4.1 (b) (i))

Offside Rear Inner Road wheel slightly distorted bead rim dented. (5.2.2 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 155/65x14 inner edge unevenly worn and wearing low - advise replacement. (5.2.3 (e))

Rear Exhaust mounting defective silencer mounting broken from system ,system now secured by metal wire. (6.1.2 (a))

Stop lamp(s) with a multiple light source up to 1/2 not functioning nearside outer segment of high level stop lamp inoperative. (4.3.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Inner Road wheel slightly distorted bead rim dented (5.2.2 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 155/65x14 inner edge wearing unevenly and wearing low - advise replacement. (5.2.3 (e))

Offside Rear Direction indicator lens defective which has no effect on emitted light lens holed (4.4.1 (b) (i))

Offside Rear Inner Road wheel slightly distorted bead rim dented. (5.2.2 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 155/65x14 inner edge unevenly worn and wearing low - advise replacement. (5.2.3 (e))

Rear Exhaust mounting defective silencer mounting broken from system ,system now secured by metal wire. (6.1.2 (a))

Stop lamp(s) with a multiple light source up to 1/2 not functioning nearside outer segment of high level stop lamp inoperative. (4.3.1 (a) (i))

It would appear that the rear brake require service or repair

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear exhaust mounting tied with wire

It would appear that the rear brake require service or repair

Nearside Front Position lamp not working (4.2.1 (a))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear exhaust mounting tied with wire

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Road wheel slightly distorted bead rims dented inner and outer (5.2.2 (c) (i))

Nearside Rear Road wheel slightly distorted inner bead rim dented (5.2.2 (c) (i))

Offside Front Road wheel slightly distorted bead rims dented inner and outer (5.2.2 (c) (i))

Offside Rear Road wheel slightly distorted inner bead rim dented (5.2.2 (c) (i))

Engine MIL inoperative or indicates a malfunction mil lamp on continously (8.2.1.2 (h))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Road wheel slightly distorted bead rims dented inner and outer (5.2.2 (c) (i))

Nearside Rear Road wheel slightly distorted inner bead rim dented (5.2.2 (c) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Road wheel slightly distorted bead rims dented inner and outer (5.2.2 (c) (i))

Offside Rear Road wheel slightly distorted inner bead rim dented (5.2.2 (c) (i))

All four tyres cracking on sidewalls and tread

All four tyres cracking on sidewalls and tread

Nearside Registration plate lamp not working (1.1.C.1d)

Child seat fitted to rear

Cracking on nearside & offside rear tyre sidewalls

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)