2010 Alfa Romeo 159

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/suspension prescribed area (5.3.6 (a) (i))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/suspension prescribed area (5.3.6 (a) (i))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Suspension arm corroded and seriously weakened both rear main suspension arms (5.3.3 (b) (i))

Tyre has a tear, caused by separation or partial failure of its structure both rears (5.2.3 (d) (ii)) DANGEROUS

Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Suspension component ball joint has slight play (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Power steering pipe/hose has slight seepage (2.1.5 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Side repeater not working (4.4.1 (a) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Power steering pipe/hose has slight seepage (2.1.5 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Tyre has ply or cords exposed BOTH FRONT TYRES ON INNER EDGES (5.2.3 (d) (ii)) DANGEROUS

Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre worn close to legal limit/worn on edge FRONT TYRES ON INNER EDGE (5.2.3 (e))

Nearside Suspension component pin or bush slightly worn (5.3.4 (a) (i))

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit wearing inner edge (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)