2001 Subaru Impreza

Nearside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill marked in yellow (6.2.2 (d) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust emissions - engine idle speed too high (8.2.1.2 (e))

Nearside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill marked in yellow (6.2.2 (d) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Underside of vehicle has general corrosion

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

All direction indicators slightly discoloured (4.4.3 (a))

Brake pipe corroded, covered in grease or other material both main feed (1.1.11 (c))

Items removed from driver's view prior to test ()

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

outer sill covers fitted

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

All direction indicators slightly discoloured (4.4.3 (a))

Brake pipe corroded, covered in grease or other material both main feed (1.1.11 (c))

Items removed from driver's view prior to test ()

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

outer sill covers fitted

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

engine under fitted cant check sub frame

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Central x2 exhaust rubbers split

Nearside Front Tyre worn close to the legal limit bald on edges (4.1.E.1)

Nearside Front Tyre worn close to the legal limit bald on edges (4.1.E.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.8% (7.3.D.3)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Central x2 exhaust rubbers split

Nearside Front Tyre worn close to the legal limit bald on edges (4.1.E.1)

Nearside Front Tyre worn close to the legal limit bald on edges (4.1.E.1)

front lower panel corroded but not within structual member

offside front subframe lower welded and undersealed

Body has a projection caused by corrosion (6.1.C.1)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Body has a projection caused by corrosion (6.1.C.1)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

rear exhaust rubber split but still surpporting system

Oil leak

Under-trays fitted obscuring some underside components

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)