2002 Toyota Corolla

exhaust shielding detioriating at centre

rear brake discs and pads worn

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

corrosion on rear fuel filler pipes

rear axle mount bushes slightly detioriated

Centre exhaust heat shield severely deteriorated

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Fuel hose deteriorated Fuel pipe corroded (6.1.3 (c) (ii))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Under body (6.1.1 (c) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle - both bushes (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Centre exhaust heat shield severely deteriorated

Front Brake disc worn, but not excessively Both (1.1.14 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Fuel hose deteriorated Fuel pipe corroded (6.1.3 (c) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Under body (6.1.1 (c) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle - both bushes (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Fuel Pipe/s corroded next to tank ()

Nearside Front Tyre worn close to legal limit/worn on edge on 1.6mm (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge on 2mm (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

exhaust heat shield corroded

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Fuel Pipe/s corroded next to tank ()

Nearside Front Tyre worn close to legal limit/worn on edge on 1.6mm (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge on 2mm (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

exhaust heat shield corroded

Fuel Pipe/s corroded at rear in front of tank ()

Nearside Front Tyre worn close to legal limit/worn on edge on 3mm (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge on 3mm (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

exhaust heat shield is deteriorated at side of fuel tank

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Front Tyre worn close to legal limit/worn on edge 3mm & has a nail in it (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Exhaust heat shield severely corroded

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Front Tyre worn close to legal limit/worn on edge 3mm & has a nail in it (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Exhaust heat shield severely corroded

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Tyre slightly damaged/cracking or perishing also on 3mm and worn stepped on inner edge (5.2.3 (d) (ii))

exhaust heat shield deteriorated on fuel tank

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Service brake binding but not excessively both (1.2.1 (f))

Nearside Front Tyre valve deteriorated slightly

Nearside Rear Tyre worn close to legal limit/worn on edge 3.0 mm (5.2.3 (e))

Offside Rear Nail in tyre ()

Nearside Rear Tyre worn close to the legal limit on 2.5mm plus worn stepped on inner edge (4.1.E.1)

Oil leak engine ()

Offside Rear tyre badly worn on inner and outer edges out side centre 3/4s, inner edge also badly worn stepped

both front head light outer lens deteriorated but not affecting beam image for test

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

both front wipers torn

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)