MOT Status
ExpiredMileage
115,264 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Inner underbody seal on sill
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Inner underbody seal on sill
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Inner underbody seal on sill
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Inner underbody seal on sill
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced FRONT AND REAR OUTER WHEEL ARCHES (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced OUTER SILLS (6.1.1 (c) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced under body (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced outer wheel arch (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer wheel arch (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced outer wheel arch (6.1.1 (c) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced under body (6.1.1 (c) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
BOTH SIDES LOWER SILLS AND UNDER BODY CORROSION
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Brake performance not tested (1.2.1 (g))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
BOTH SIDES LOWER SILLS AND UNDER BODY CORROSION
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Child Seat fitted not allowing full inspection of adult belt ()
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PX55 PBV is a 2005 Mazda 6 in Red with a 1,999cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 85%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying PX55 PBV, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PX55 PBV?
You can check the full history of PX55 PBV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PX55 PBV registered?
PX55 PBV is a 2005 Mazda 6, first registered on 30 November 2005.
Is PX55 PBV safe to buy?
The MOT history for PX55 PBV shows 20 tests with a 85% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PX55 PBV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PX55 PBV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.