MOT Status
ValidMileage
155,692 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake load sensing valve stiff (1.1.17 (c) (i))
Front Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))
Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
both front inner wings corroded
vehicle corroded under side
Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS
Front Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))
Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
both front inner wings corroded
vehicle corroded under side
Nearside Front Inner wing corroded
Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Fuel pipe leaking pipes corroded (6.1.3 (b) (i))
Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Prop shaft joint excessively worn (6.1.7 (c) (i))
Nearside Front Inner wing corroded
Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened all four (5.3.3 (b) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension component mounting repair covered in underseal spring mount (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
rear crossmember corroded
Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))
Front Suspension arm corroded but not seriously weakened all four (5.3.3 (b) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension component mounting repair covered in underseal spring mount (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
rear crossmember corroded
Suspension arm corroded but not seriously weakened all four at front (5.3.3 (b) (i))
both front wings rear body/tub and front bumper corroded
vehicle corroded underside
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Suspension arm corroded but not seriously weakened all four at front (5.3.3 (b) (i))
both front wings rear body/tub and front bumper corroded
vehicle corroded underside
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
vehicle body corroded and underside
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (5.3.6 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
vehicle body corroded and underside
Rear Brake pipe corroded, covered in grease or other material both above rear axle (1.1.11 (c))
under body and body corrosion
Front Brake pipe excessively corroded both (1.1.11 (c))
Offside Rear Leaf spring fractured (5.3.1 (b) (i))
Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Tyre tread depth below requirements of 1.6mm both (5.2.3 (e)) DANGEROUS
Rear Brake pipe corroded, covered in grease or other material both above rear axle (1.1.11 (c))
under body and body corrosion
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Position lamp incorrect colour (4.2.3 (a) (i))
vehicle corroded under side
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Central Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Position lamp incorrect colour (4.2.3 (a) (i))
vehicle corroded under side
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear position lamp(s) slightly discoloured (1.1.A.3e)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement both (2.4.B.2)
Rear Shock absorber has slight corrosion to the casing both (2.7.2a)
exhaust mount missing
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear position lamp(s) slightly discoloured (1.1.A.3e)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement both (2.4.B.2)
Rear Shock absorber has slight corrosion to the casing both (2.7.2a)
Rear fog lamp not working (1.3.2b)
exhaust mount missing
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)
Rear Shock absorber has slight corrosion to the casing both (2.7.2a)
exhaust mount corroded
only just passed emmissions
Nearside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
only just passed emmissions
Fuel pipe/s corroded
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
o/s/r tyre on 3mm
Offside Brake pipe excessively corroded (3.6.B.2c)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Fuel pipe/s corroded
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
o/s/r tyre on 3mm
Front Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
o/s/f tyre low on inner edge
Brakes imbalanced across an axle (3.7.B.5b)
Offside Rear Stop lamp adversely affected by the operation of another lamp (1.2.1f)
o/s/f tyre low on inner edge
Centre Exhaust system not adequately supported (7.1.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
rear fog lamp has slight damage
Nearside Rear Leaf spring fractured (2.4.B.1a)
Offside Rear Leaf spring fractured (2.4.B.1a)
How Reliable is the Mazda B Series?
Based on 136,422 MOT tests across 9,870 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PY03 MZT is a 2003 Mazda B Series in Blue with a 2,499cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 59.4%.
Across all 2003 Mazda B Series models, the average MOT pass rate is 70.5% with a typical mileage of 84,674 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda B Series fails its MOT is brake pipe excessively corroded, accounting for 9,638 recorded failures. If you're considering buying PY03 MZT, it's worth having these areas checked by a mechanic before committing.
The Mazda B Series typically stays on UK roads for around 38 years. At 23 years old, this Mazda B Series is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of PY03 MZT?
You can check the full history of PY03 MZT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PY03 MZT registered?
PY03 MZT is a 2003 Mazda B Series, first registered on 29 July 2003.
Is PY03 MZT safe to buy?
The MOT history for PY03 MZT shows 32 tests with a 59.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PY03 MZT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PY03 MZT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.