MOT Status
ValidMileage
119,805 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Under-chassis, Suspension, & Brake components corroded.
Under-chassis, Suspension, Exhaust & Brake components corroded.
Brake performance unable to be tested (1.2.1 (g))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear Brake pipe excessively damaged (1.1.11 (c))
Under-chassis, Suspension, Exhaust & Brake components corroded.
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Brake pipe corroded, covered in grease or other material to hose. (1.1.11 (c))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material to hose. (1.1.11 (c))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material to hose. (1.1.11 (c))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Emissions unable to be completed major exhaust leak affecting emissions readings. (8.2.1.2 (d))
Front Exhaust has a major leak of exhaust gases flexi pipe. (6.1.2 (a))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Service brake excessively binding (1.2.1 (f))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Brake pipe corroded, covered in grease or other material to hose. (1.1.11 (c))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material to hose. (1.1.11 (c))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material to hose. (1.1.11 (c))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Subframe mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Sub-frame likely to fail (5.3.3 (b) (ii)) DANGEROUS
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Tyre worn close to the legal limit edge worn (4.1.E.1)
Nearside Rear Outer Tyre worn close to the legal limit outer edge worn (4.1.E.1)
Offside Front Tyre worn close to the legal limit inner edge worn (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
nearside and offside rear tyre`s deteriorated
How Reliable is the Hyundai I10?
Based on 2,829,935 MOT tests across 251,032 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PY09 MHE is a 2009 Hyundai I10 in Blue with a 1,248cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 73.7%.
Across all 2009 Hyundai I10 models, the average MOT pass rate is 76.7% with a typical mileage of 43,653 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I10 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 15,951 recorded failures. If you're considering buying PY09 MHE, it's worth having these areas checked by a mechanic before committing.
The Hyundai I10 typically stays on UK roads for around 18 years. At 17 years old, this Hyundai I10 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PY09 MHE?
You can check the full history of PY09 MHE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PY09 MHE registered?
PY09 MHE is a 2009 Hyundai I10, first registered on 31 July 2009.
Is PY09 MHE safe to buy?
The MOT history for PY09 MHE shows 19 tests with a 73.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PY09 MHE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PY09 MHE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.