MOT Status
ExpiredMileage
129,255 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt nearside and offside (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Seat belt anchorage prescribed area is corroded but not considered excessive nearside and offside inner and outer sills (5.2.6)
Vehicle structure has slight corrosion front and rear (6.1.B.2)
Front registration plate deteriorated (6.3.1d)
Nearside Front Headlamp aim too low (1.8)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front front brake binding (3.7.B.1) DANGEROUS
Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS
Offside Front front brake binding (3.7.B.1) DANGEROUS
Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt nearside and offside (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Seat belt anchorage prescribed area is corroded but not considered excessive nearside and offside inner and outer sills (5.2.6)
Vehicle structure has slight corrosion front and rear (6.1.B.2)
Brake pipe slightly corroded (3.6.B.2c)
Battery insecure (1.9.1)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Brake lining(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear Suspension arm corroded and seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside front brake binding (3.7.B.1)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Suspension arm corroded and seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside front brake binding (3.7.B.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.D.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Inner Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear brake juddering severely (3.7.A.5b)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust system not adequately supported (7.1.1)
Child seat fitted not allowing full inspection of adult belt
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Child seat fitted not allowing full inspection of adult belt
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Exhaust system not adequately supported (7.1.1)
Nearside Rear brake disc excessively pitted (3.5.1h)
Offside Rear brake disc excessively pitted (3.5.1h)
Child seat fitted not allowing full inspection of adult belt
rear tyres worn unevenly giving road noise
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
rear tyres worn unevenly giving roadnoise
Offside Front Headlamp aim too low (1.8)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PY54 KYK is a 2005 Mazda 6 in Grey with a 2,261cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 50%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying PY54 KYK, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PY54 KYK?
You can check the full history of PY54 KYK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PY54 KYK registered?
PY54 KYK is a 2005 Mazda 6, first registered on 21 February 2005.
Is PY54 KYK safe to buy?
The MOT history for PY54 KYK shows 18 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PY54 KYK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PY54 KYK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.