2010 Gas Gas Ec 300

Drive chain excessively loose (6.1.7 (c) (i))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Shock absorber has a serious fluid leak both fork seals (5.3.2 (b))

Rear Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Exhaust is leaking but is not excessively noisey small hole in silencer (7.1.1b)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front shock absorber has light misting of stanchion both (2.3.3)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Headlamp damaged but function not impaired (1.2.3a)

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Oil leak ()

Rear Brake pedal pivots slightly worn (3.1.3a)

unable to see rear brake fluid level

Drive chain excessively loose (6.2.1d)

Front wheel bearings have excessive free play (2.3.5b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride chain link circlip direction wrong (6.2.1h)

Rear position lamp missing (1.1.1a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Stop lamp missing (1.3.3a)

Exhaust is leaking but is not excessively noisey small hole in silencer (7.1.1b)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front shock absorber has light misting of stanchion both (2.3.3)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Headlamp damaged but function not impaired (1.2.3a)

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Oil leak ()

Rear Brake pedal pivots slightly worn (3.1.3a)

unable to see rear brake fluid level

Front Mudguard damaged

Front shock absorber seal failed and leaking oil Both (2.3.3)

Headlamp dipped beam affected by the operation of another lamp (1.2.2c)

Headlamp main beam affected by the operation of another lamp (1.2.2c)

Front Mudguard damaged

Direction indicator missing All (1.5.1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre is unsuitable (4.1.1)

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Horn missing (1.7.1)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre is unsuitable (4.1.1)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Brake disc(s) securing bolt(s) missing (3.2.A1g) DANGEROUS

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride Rear sprocket loose (6.2.1h) DANGEROUS

Rear Mudguard loose

Rear suspension bearing has slight free play (2.4.A2a(i))

Front wheel bearings have slight free play (2.3.5b)

this is a day time mot only and must not be used at night or at times of poor visibility