MOT Status
ExpiredMileage
3,122 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Suspension component mounting prescribed area modified, but not inappropriately (2.4.A.3)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear Brake hose slightly deteriorated (3.6.B.4d)
Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
slight corrosion in boot floor & rear chassis legs .....30 cm away from eny prescribed area
slight play in rear axle mounting bush
Front Direction indicator not working (1.4.A.2c)
Indicator switch faulty (1.4.A.1)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Direction indicator not working (1.4.A.2c)
Spare wheel carrier insecure (6.4.2)
Steering column universal joint has excessive play (2.1.5)
Steering column universal joint is excessively deteriorated (2.1.5)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Suspension component mounting prescribed area modified, but not inappropriately (2.4.A.3)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear Brake hose slightly deteriorated (3.6.B.4d)
Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
slight corrosion in boot floor & rear chassis legs .....30 cm away from eny prescribed area
slight play in rear axle mounting bush
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Rear Vehicle structure has slight corrosion (6.1.A.1)
n/s front tyre wearing inner edge
n/s rear tyre slightly cracking outer wall
o/s & n/s rear inner sills starting to corrode
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim not tested (1.8.A.1c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Steering column universal joint has excessive play (2.1.5)
front brake application uneven (3.7.B.2)
front brakes release unevenly (3.7.B.4)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Rear Vehicle structure has slight corrosion (6.1.A.1)
exhaust shield insecure
n/s front tyre wearing inner edge
n/s rear tyre slightly cracking outer wall
o/s & n/s rear inner sills starting to corrode
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside rear tyre wall deteriorated
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Coil spring not correctly located (2.4.C.2)
Nearside Rear coil spring fractured (2.4.C.1a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside rear tyre wall deteriorated
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has part of the system excessively deteriorated (7.1.1a)
Nearside Rear coil spring fractured (2.4.C.1a)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
front brake discs corroded
Nearside Body has slight corrosion (6.1.B.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Body has slight corrosion (6.1.B.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
all under body corrosion
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Registration plate lamp not working (1.1.5c)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Registration plate lamp not working (1.1.5c)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R112 AWB is a 1998 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 53.8%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying R112 AWB, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R112 AWB?
You can check the full history of R112 AWB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R112 AWB registered?
R112 AWB is a 1998 Ford Ka, first registered on 29 May 1998.
Is R112 AWB safe to buy?
The MOT history for R112 AWB shows 13 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R112 AWB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R112 AWB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.