MOT Status
ExpiredMileage
172,113 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced end off sill (7.1.1 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Brake hose damaged and likely to fail (1.1.12 (a)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both inner sills & both chassis legs (5.3.6 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive Full length of both inner sills (7.1.1 (a) (i))
Sub-frame corroded but not seriously weakened Front & rear (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened All arms (5.3.3 (b) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both inner sills and both chassis legs (5.3.6 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive Full length of both inner sills (7.1.1 (a) (i))
Sub-frame corroded but not seriously weakened Front & rear (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened All Arms (5.3.3 (b) (i))
Rear Brake pipe corroded, covered in grease or other material Both suides (1.1.11 (c))
Sub-frame corroded but not seriously weakened Front & rear (5.3.3 (b) (i))
Tyre worn close to legal limit/worn on edge Nsf & osr (5.2.3 (e))
Seat belt anchorage prescribed area is corroded but not considered excessive Both inner sils (7.1.1 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both rear chassis legs (5.3.6 (a) (i))
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive Both inner sills (5.2.6)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Slight imbalance on rear brakes
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Headlamp aim too low (1.8)
Nearside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Exhaust emissions hydrocarbon content excessive (7.3.B.1b)
Exhaust engine idle speed too high (7.3.A.2a)
Offside Rear Suspension arm corroded and seriously weakened (2.4.G.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Body has slight corrosion (6.1.B.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.B.2)
both rear tyre excessively cracked on walls not deep enough to reach plys or cords
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.B.2)
both rear tyre excessively cracked on walls not deep enough to reach plys or cords
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear coil spring fractured (2.4.C.1a)
Child seat fitted not allowing full inspection of adult belt
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
minor cut on n/s/f tyre sidewall
o/s/f seat belt slow to return
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Registration plate lamp not working (1.1.5c)
n/s o/s front brake flexi slightly perished
n/s o/s outer cv gators slightly cracking
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R128 ODP is a 1998 Mazda 323 in Green with a 1,489cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 1998 Mazda 323 models, the average MOT pass rate is 65.5% with a typical mileage of 87,911 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying R128 ODP, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 28 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of R128 ODP?
You can check the full history of R128 ODP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R128 ODP registered?
R128 ODP is a 1998 Mazda 323, first registered on 30 March 1998.
Is R128 ODP safe to buy?
The MOT history for R128 ODP shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R128 ODP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R128 ODP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.