2005 Mazda Bongo

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Spare tyre defective ()

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength behind plastic cover inside wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Coolant leak ()

Offside Hydraulic leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))

Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Horn not working (7.7 (a))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Spare tyre defective ()

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mount (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Rear fog lamp switch missing (4.5.3 (a))

Brake pipe corroded, covered in grease or other material front to rear at rear section (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Play in steering rack inner joint(s) ()

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Play in steering rack inner joint(s) ()

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Horn not working (7.7 (a) (ii))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Play in steering rack inner joint(s) ()

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Spare tyre defective ()

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Suspension component mounting prescribed area is corroded but not considered excessive n/s & o/s front arms (5.3.6 (a) (i))

Nearside Rear Nail in tyre ()

Nearside Rear hub seal leaking

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Passenger seat(s) missing at time of test 2nd line o/s ()

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material as it passes over fuel tank (1.1.11 (c))

rear bump stops corroded

sills corroded and hold n/s & o/s

towbar component corroded

under side of vehicle general surface corrosion

Rear fog lamp switch missing (4.5.3 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Suspension component mounting prescribed area is corroded but not considered excessive n/s & o/s front arms (5.3.6 (a) (i))

Nearside Rear Nail in tyre ()

Nearside Rear hub seal leaking

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Passenger seat(s) missing at time of test 2nd line o/s ()

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material as it passes over fuel tank (1.1.11 (c))

rear bump stops corroded

sills corroded and hold n/s & o/s

towbar component corroded

under side of vehicle general surface corrosion

Both front tyres wearing unevenly

Both inner sills corroded

Nearside Rear oil leak from hub

Oil leak ()

Both front inner sills under car corroded

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Slight leak from n/s/r hub

both front inner sills badly corroded

o/s/f tyre worn on inside edge

o/s/r lamp lense damaged

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pipe slightly corroded (3.6.B.2c)

corrosion in nsf inner sill but not within 30cms of any relevent component

corrosion starting in various places

fuel filler neck cover insecure

Oil leak

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Oil leak

Offside Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Rear fog lamp does not face the rear (1.3.2a)

Oil leak

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear fog lamp not working (1.3.2b)

Nearside Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Rear fog lamp not working (1.3.2b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

advise front fog lights on all the time with side lights