1998 Rover Mini

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Outer Suspension arm attachment bracket/mounting worn and its strength is seriously reduced (2.4.G.1)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Outer Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Upper Seat belt anchorage prescribed area is corroded but not considered excessive b pillar (5.2.6)

Offside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive both sides (5.2.6)

Front Upper Suspension arm has slight play in a ball joint both sides (2.4.G.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp not working (1.3.2b)

Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive both sides (5.2.6)

Front Upper Suspension arm has slight play in a ball joint both sides (2.4.G.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Front registration plate missing (6.3.1a)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Sub-frame attachment slightly worn (2.4.G.1)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

front vallance corroded

o/s/f outer sill corroded and holed

Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Sub-frame attachment slightly worn (2.4.G.1)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

front vallance corroded

o/s/f outer sill corroded and holed

Front Direction indicators slightly discoloured (1.4.A.2f)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

o/s/f sill holed

Nearside Headlamp aim too high (1.8)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

sills corroding

Front Suspension arm has slight play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension arm has slight play in a ball joint (2.4.G.2)