2007 Mazda Bongo Friendee

Offside Rear Inner Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

minor oil leaks

surface corrosion present on front chassis and front crossmember

Emissions unable to be completed (8.2.2.2 (e))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Outer sills lightly corroded

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear chassis legs slightly corroded

Coolant leak ()

Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

auto gearbox pipes corroded

outer sills corroded

suspension components heavily corroded

under side of vehicle heavily corroded

Central Vehicle structure excessively corroded within 30cm of towbar mounting marked (6.1.6 (i) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt drop link (5.3.4 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength behind front bumper, marked (5.3.6 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, marked (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower ball joint (5.3.4 (b) (ii))

Nearside Rear Direction indicator adversely affected by the operation of another lamp when operating stop lamps/indicator (4.4.3 (b))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting marked (6.1.6 (i) (i))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength behind front bumper, marked (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, marked (5.3.6 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, marked (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear fog lamp tell-tale not working (4.9.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Speedometer cannot be illuminated (7.8 (c) (ii))

Coolant leak ()

Nearside Stop lamp(s) light intensity obviously reduced (4.3.3 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated lower ball joint (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

excessive corrosion to front cross member

rear wheels tight to rotate

suspension components corroded

underside of vehicle heavily corroded/undersealed

Horn not working (7.7 (a) (ii))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Towbar excessively corroded within 30cm of towbar mounting whole corner (6.1.6 (i) (i))

Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by shock top (5.3.6 (a) (i))

Offside Rear Towbar excessively corroded within 30cm of towbar mounting whole corner (6.1.6 (i) (i))

very poor under side

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre obviously under inflated (5.2.3 (h) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Suspension arm has excessive play in a pin/bush drop link (2.4.G.2)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drop sill (6.1.B.2)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

slight oil leak on n/s/r hub

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

slight oil leak on n/s/r hub

Under-trays fitted obscuring some underside components

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Under-trays fitted obscuring some underside components

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Front suspension has slight play in a track control arm inner bush (2.5.B.2b)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

bonnet holder insecure

both front tyres inner edge worn

both rear bottom shocker bush slightly perished

slight judder at front brakes

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Parking brake lever has no reserve travel (3.1.6b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Rear fog lamp missing (1.3.2a)

Seat belt attachment fitting badly deteriorated (5.2.3)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

bonnet holder insecure

both front tyres inner edge worn

both rear bottom shocker bush slightly perished

slight judder at front brakes