1998 Mazda Bongo

Front Suspension rod ball joint has slight play (5.3.4 (a) (i))

both side Front Suspension component mounting prescribed area is corroded but not considered excessive

both side Rear Integral body structure is corroded but structural rigidity is not significantly reduced

brake pipe, subframe, inner/outer sills, inner wheel arch, chassie leg, under body, suspension components corroded

Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))

Front Suspension rod ball joint has slight play (5.3.4 (a) (i))

both side Front Suspension component mounting prescribed area is corroded but not considered excessive

both side Rear Integral body structure is corroded but structural rigidity is not significantly reduced

brake pipe, subframe, inner/outer sills, inner wheel arch, chassie leg, under body, suspension components corroded

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Centre brake light inoperative

Front Anti-roll bar linkage ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Suspension arm ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Centre brake light inoperative

Front Anti-roll bar linkage ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Suspension arm ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust on a vehicle fitted with a diesel particulate filter emits visible smoke of any colour (8.2.2.2 (d))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

offside rear light lense cracked

under body corrosion

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

Inner Exhaust has a major leak of exhaust gases centre (7.1.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leaks

Exhaust has a major leak of exhaust gases Back box (7.1.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leaks

Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Oil leaking by Oil filter

Nearside Front Anti-roll bar missing (2.4.G.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)