2004 Mercedes-benz Viano

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Brake hose excessively deteriorated (1.1.12 (b) (ii))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body (6.1.1 (c) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Brake hose excessively deteriorated (1.1.12 (b) (ii))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced whole under body (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

whole underbody undersealed

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive shock mount (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive shock mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting body support (6.2.2 (d) (i))

Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting body support (6.2.2 (d) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/wheel arch (6.2.2 (d) (i))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember/ bumper mount x3 patches (6.1.1 (c) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside sliding door corroded in centre

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside sliding door corroded at front

Nearside Direction indicator missing side repeater (4.4.1 (a) (ii))

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting x2 (6.2.2 (d) (i))

Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security center (6.2.2 (d) (i))

Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside sliding door corroded in centre

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security center (6.2.2 (d) (i))

Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside sliding door corroded at front

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Brake performance not tested Due to brake disc o/s/f (1.2.1 (g))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Service brake excessively binding (1.2.1 (f))

Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

various underbody corrosion

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

various underbody corrosion

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake lever has no reserve travel (3.1.6b)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)