1997 Honda CBR1100XX

Front Brake excessively binding (1.2.1 (f))

Front Brake binding but not excessively (1.2.1 (f))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brake excessively binding (1.2.1 (f))

Rear Stop lamp not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

R/WHEEL BEARINGS NOT TESTED due to sized brake

rear foot brake stiff

Nearside Front Inner Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain excessively loose (6.2.1d) DANGEROUS

Drive chain worn to excess (6.2.1e) DANGEROUS

Front Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Rear Drive chain sprocket worn to excess (6.2.1e) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Front wheel bearings have excessive free play (2.3.5b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front wheel bearings are slightly rough (2.3.5b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)