MOT Status
ExpiredMileage
122,653 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension component mounting prescribed area is corroded but not considered excessive wheel arches both sides (5.3.6 (a) (i))
Fuel cap seal perishing
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Nail in tyre ()
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sills. Both sides (5.3.6 (a) (i))
Sub-frame corroded but not seriously weakened both front and rear (5.3.3 (b) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel cap seal perishing
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to arch (5.3.6 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel cap seal perishing
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))
Fuel pipes corroding
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced all over (6.1.1 (c) (i))
fuel cap seal perishing
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides bushes perishing (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides bushes perishing (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
rear fuel pipe slightly corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
rear fuel pipe slightly corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel cap/sealing device ineffective (6.1.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front and rear suspension components very rusty
Front cross member rusty
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive and outer sills (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive and outer sills (2.4.A.3)
Rear chassis rusty
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front and rear suspension components very rusty
Front cross member rusty
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive and outer sills (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive and outer sills (2.4.A.3)
Rear chassis rusty
Front Brake pad(s) wearing thin (3.5.1g)
Front cross member rusty
Front suspension components rusty
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills (2.4.A.3)
Rear suspension components rusty
Front Brake pad(s) wearing thin (3.5.1g)
front cross member corroded
Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Front Brake pad(s) wearing thin (3.5.1g)
front crossmember corroded
rear outer sills corroded
Front registration plate deteriorated (6.3.1d)
Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
rear outer sills corroded
offside front tyre worn on inner edge
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Rear registration plate deteriorated (6.3.1d)
offside front tyre worn on inner edge
offside washer jet weak
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Rear Brake pipe excessively corroded (3.6.B.2c)
Windscreen washer provides insufficient washer liquid (8.2.3)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Front registration plate deteriorated (6.3.1d)
Offside Front All position lamps not working (1.1.A.3b)
Rear registration plate faded (6.3.1d)
exhaust corroded
front and rear number plates starting to delaminate
front brake discs worn and pads low
outer cv gaiters slightly perished
slight corrosion underside
sump corroded
very slight play in steering rack
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
exhaust corroded
front and rear number plates starting to delaminate
front brake discs worn and pads low
outer cv gaiters slightly perished
slight corrosion underside
sump corroded
very slight play in steering rack
exhaust heavily corroded
front crossmember corroded
front discs and pads worn
outer cv gaiters very slightly perished
rear number plate delaminating
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
exhaust heavily corroded
front crossmember corroded
front discs and pads worn
outer cv gaiters very slightly perished
rear number plate delaminating
ADVISE..FRONT,LOWER CROSS MEMBER,HEAVY CORRODED.
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
SLIGHT SMEAR FROM NEARSIDE WIPER.
How Reliable is the Nissan Almera?
Based on 2,976,239 MOT tests across 231,560 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R201 JHO is a 1998 Nissan Almera in Green with a 1,392cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 62.5%.
Across all 1998 Nissan Almera models, the average MOT pass rate is 67.0% with a typical mileage of 80,168 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Almera fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 141,538 recorded failures. If you're considering buying R201 JHO, it's worth having these areas checked by a mechanic before committing.
The Nissan Almera typically stays on UK roads for around 30 years. At 28 years old, this Nissan Almera is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R201 JHO?
You can check the full history of R201 JHO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R201 JHO registered?
R201 JHO is a 1998 Nissan Almera, first registered on 19 June 1998.
Is R201 JHO safe to buy?
The MOT history for R201 JHO shows 32 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R201 JHO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R201 JHO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.