1997 Ldv Convoy

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust system insecure (6.1.2 (a))

Nearside Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Vehicle structure has slight corrosion (6.1.A.1)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front Body has slight corrosion cross member holed outside prescribed area (6.1.B.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Oil leak ()

underside of the vehicle has slight corrosion

Battery insecure (1.9.1)

Bonnet cannot be secured in the closed position (8.4.1)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor at forward leaf spring attachment (2.4.A.3)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill at door step (6.1.B.2)

Offside Rear Suspension spring mounting prescribed area is excessively corroded floor at forward leaf spring attachment (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front Body has slight corrosion cross member holed outside prescribed area (6.1.B.2)

Oil leak ()

underside of the vehicle has slight corrosion

Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch (6.1.B.2)

Offside Rear Outer Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Offside Rear Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Vehicle structure has slight corrosion (6.1.A.1)

Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Vehicle structure has slight corrosion (6.1.A.1)

Bonnet slam panel corroded and holed.

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Outer Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Exhaust system not adequately supported (7.1.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Outer Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Bonnet slam panel corroded and holed.

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Outer Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Battery insecure

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Slam panel corroded and holed.

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside front brake juddering severely (3.7.A.2b)

Offside Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside front brake juddering severely (3.7.A.2b)

rear brake application uneven (3.7.B.2)

Battery insecure

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Slam panel corroded and holed.

Propshaft component defective

Battery insecure

Bearing grease cap missing n/s/f hub.

Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

Oil leak

Offside rear brake application uneven (3.7.B.2)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Battery insecure

Bearing grease cap missing n/s/f hub.

Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

Oil leak

Battery insecure

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Registration plate lamp not working (1.1.5c)

Offside Headlamp aim too low (1.8)

Offside Rear fog lamp not working (1.3.2b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Battery insecure

Nearside Front Service brake indicates brake bind (3.7.D.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Parking brake recording little or no effort (3.7.D.3a)

Steering system excessively rough (2.2.D.1)

Service brake: efficiency below requirements (3.7.D.4) DANGEROUS

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.D.4)

Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)

Nearside Front Service brake indicates brake bind (3.7.D.2a)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Rear Service brake indicates brake bind (3.7.D.2a)

Offside Front Drag link end ball joint has excessive play (2.2.B.1f)

Offside Front Lower Shock absorber has an excessively worn bush (2.7.4)

Nearside Front brake disc excessively pitted (3.5.1h)

Offside Front brake disc excessively pitted (3.5.1h)

Nearside Front Lower Shock absorber has a slightly worn bush (2.7.4)

nail in tyre