MOT Status
ValidMileage
127,598 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Outer Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Axle heavily corroded
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Central Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Outer Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Axle heavily corroded
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle bush (5.3.4 (a) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle bush (5.3.4 (a) (i))
Rear Axle rusty
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm 155/65/14 (5.2.3 (e)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle bush (5.3.4 (a) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Axle bush (5.3.4 (a) (i))
Rear Axle rusty
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources also lens missing (4.7.1 (b) (i))
Rear Suspension arm corroded but not seriously weakened Axle beam (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement Both axle bushes (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both outer/inner sill ends (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources also lens missing (4.7.1 (b) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear Suspension arm corroded but not seriously weakened Axle beam (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement Both axle bushes (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both outer/inner sill ends (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake performance not tested Rear brake bind! (1.2.1 (g))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear axle rusty
Central Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Items removed from driver's view prior to test
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Nearside Front Road wheel badly distorted (5.2.2 (c) (i))
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R21 HST is a 2007 Peugeot 107 in Silver with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 72%.
Across all 2007 Peugeot 107 models, the average MOT pass rate is 74.0% with a typical mileage of 56,654 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying R21 HST, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 19 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R21 HST?
You can check the full history of R21 HST by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R21 HST registered?
R21 HST is a 2007 Peugeot 107, first registered on 25 June 2007.
Is R21 HST safe to buy?
The MOT history for R21 HST shows 25 tests with a 72% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R21 HST have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R21 HST. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.