MOT Status
ExpiredMileage
110,780 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
rear brake application uneven (3.7.B.2) DANGEROUS
rear brakes release unevenly (3.7.B.4) DANGEROUS
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
underbody areas surface corroding + patch repaired.
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
rear brake application uneven (3.7.B.2)
rear brakes release unevenly (3.7.B.4)
Nearside Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
underbody areas surface corroding + patch repaired.
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
various under side corrosion started and patch repairs to rear sill areas ///// exhaust started to deteriorate
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
underbody areas surface corroding + patch repaired areas.
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
underbody areas surface corroding + patch repaired.
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
uderbody areas patch repaired
underboy areas surface corroding
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
engine drive belts starting to split
underboy areas surface corroding
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nail in nearside rear tyre
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
o/s/r sill getting thin
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Headlamp aim not tested (1.8.A.1c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
rear brake application uneven (3.7.B.2)
Offside rear brake juddering slightly (3.7.A.5b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
main beam warning light stays on
as per test 671378837022
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
due to tyre wear, wheel alignment may require adjustment
front tyres wearing on edges
Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
How Reliable is the Nissan Almera?
Based on 2,976,239 MOT tests across 231,560 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R224 RLJ is a 1998 Nissan Almera in Blue with a 1,392cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 1998 Nissan Almera models, the average MOT pass rate is 67.0% with a typical mileage of 80,168 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Almera fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 141,538 recorded failures. If you're considering buying R224 RLJ, it's worth having these areas checked by a mechanic before committing.
The Nissan Almera typically stays on UK roads for around 30 years. At 28 years old, this Nissan Almera is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R224 RLJ?
You can check the full history of R224 RLJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R224 RLJ registered?
R224 RLJ is a 1998 Nissan Almera, first registered on 7 March 1998.
Is R224 RLJ safe to buy?
The MOT history for R224 RLJ shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R224 RLJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R224 RLJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.