1998 Suzuki GSF600

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Headlamp light intensity reduced (4.1.4 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pivot worn, but not excessively (1.1.15 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Headlamp light intensity reduced (4.1.4 (a))

Horn not working (7.7 (a) (ii))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pivot worn, but not excessively (1.1.15 (b))

Registration plate does not conform to the specified requirements (0.1 (d))

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Drive chain excessively loose (6.2.1d)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Exhaust noisy (7.1.2)

Nearside Front Brake disc(s) slightly worn Slight play in floating disc mount bobbins (3.2.A1l)

Offside Front Brake disc(s) slightly worn Slight play in floating disc mount bobbins (3.2.A1l)

Offside Oil cooler pipe is leaking at connection to cooler

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Offside Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Footrest missing (6.2.1a)

Rear Rear reflector on motorcycle missing (1.4.1)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Offside Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Footrest insecure (6.2.1a)

Headlamp aim too low (1.6)

Rear Brake locking device insecure (3.2.A1e)

Wheel alignment slightly misaligned. (2.5.1)

Wheel alignment slightly misaligned. (2.5.1)

Drive chain worn to excess (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front shock absorber seal failed and leaking oil (2.3.3)

Horn not working (1.7.3a)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear reflector on motorcycle missing (1.4.1)

Registration plate margin less than the minimum requirement (6.3.4g)

Exhaust noisy (7.1.2)

Front Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Exhaust noisy (7.1.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))