MOT Status
ExpiredMileage
78,652 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front brake binding slightly.
Nearside Front drive shaft has quite a lot of movement in and out of joint.
Nearside Outer Front constant velocity joint is slightly worn noisy when turning on either lock. (2.5.C.1b)
both rear corners corroded and holed but outside prescribed areas.
Offside Front Body has a sharp edge caused by corrosion wing/wheel arch (6.1.C.1)
Nearside Front brake binding slightly.
Nearside Front drive shaft has quite a lot of movement in and out of joint.
Nearside Outer Front constant velocity joint is slightly worn noisy when turning on either lock. (2.5.C.1b)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive rear sill to floor. (5.2.6)
both rear corners corroded and holed but outside prescribed areas.
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust system not adequately supported (7.1.1)
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
both rear corners corroded and holed, but outside of prescribed areas.
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside rear tyre has crackes in tread
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
both front tyres slightly distorted treads
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
slight knock from rear shocks
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
slight knock from rear shocks
How Reliable is the Nissan Almera?
Based on 2,976,239 MOT tests across 231,560 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R234 YPW is a 1997 Nissan Almera in Red with a 1,597cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 1997 Nissan Almera models, the average MOT pass rate is 65.7% with a typical mileage of 85,577 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Almera fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 141,538 recorded failures. If you're considering buying R234 YPW, it's worth having these areas checked by a mechanic before committing.
The Nissan Almera typically stays on UK roads for around 30 years. At 29 years old, this Nissan Almera is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R234 YPW?
You can check the full history of R234 YPW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R234 YPW registered?
R234 YPW is a 1997 Nissan Almera, first registered on 1 August 1997.
Is R234 YPW safe to buy?
The MOT history for R234 YPW shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R234 YPW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R234 YPW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.