MOT Status
ExpiredMileage
211,713 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure but not likely to fall from carrier BOTH (4.13 (a) (i))
Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Emissions unable to be completed Due to exhaust condition (8.2.2.2 (e))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Crossmember (5.3.6 (a) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and Outer sill holed (6.1.1 (c) (i))
Rear Exhaust system insecure (6.1.2 (a))
Rear fog lamp not working (4.5.1 (a) (ii))
Front Prop shaft joint worn, but not excessively (6.1.7 (c) (i))
Nearside Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Stop lamp(s) lens defective which has no effect on emitted light Cluster damaged (4.3.1 (b) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge outer edge wear (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge outer edge wear (5.2.3 (e))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Rear fog lamp switch inoperative (4.5.3 (a) (ii))
Windscreen washer provides insufficient washer liquid both (3.5 (a))
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a))
Offside Rear Road wheel tyre retaining ring likely to come off (5.2.2 (b) (ii)) DANGEROUS
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside front brake binding (3.7.B.1)
front brake application uneven (3.7.B.2)
front brakes release unevenly (3.7.B.4)
Headlamp has a product on the lens but not seriously reducing light output both (1.7.5a)
Nearside Front front brake binding (3.7.B.1)
Service brake: efficiency below requirements (3.7.B.7)
Headlamp has a product on the lens but not seriously reducing light output both (1.7.5a)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Body has a sharp edge caused by damage (6.1.C.1)
Horn not working (1.6.2a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
rear exhaust very rusty
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Registration plate lamp not working (1.1.5c)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R235 RMW is a 1997 Mazda Bongo in White with a 2,490cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 58.3%.
Across all 1997 Mazda Bongo models, the average MOT pass rate is 66.3% with a typical mileage of 131,832 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying R235 RMW, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 29 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R235 RMW?
You can check the full history of R235 RMW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R235 RMW registered?
R235 RMW is a 1997 Mazda Bongo, first registered on 31 December 1997.
Is R235 RMW safe to buy?
The MOT history for R235 RMW shows 24 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R235 RMW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R235 RMW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.