MOT Status
ExpiredMileage
139,363 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
clutch slipping
nearside rear outer sill end appears filled
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
front brake pads thin
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
front pannel corroded
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
surface corrosion on front inner wings and bulkhead, front and rear floor and chassis and rear upper strut mounting areas
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
offside rear tyre worn and perished
surface corrosion on front inner wings and bulkhead, front and rear floor and chassis and rear upper strut mounting areas
Nail in nearside front tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
How Reliable is the Nissan Almera?
Based on 2,976,239 MOT tests across 231,560 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R23 BPU is a 1998 Nissan Almera in Red with a 1,392cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 63.6%.
Across all 1998 Nissan Almera models, the average MOT pass rate is 67.0% with a typical mileage of 80,168 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Almera fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 141,538 recorded failures. If you're considering buying R23 BPU, it's worth having these areas checked by a mechanic before committing.
The Nissan Almera typically stays on UK roads for around 30 years. At 28 years old, this Nissan Almera is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R23 BPU?
You can check the full history of R23 BPU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R23 BPU registered?
R23 BPU is a 1998 Nissan Almera, first registered on 18 June 1998.
Is R23 BPU safe to buy?
The MOT history for R23 BPU shows 11 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R23 BPU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R23 BPU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.