1997 Mercedes-benz Vito

Offside Headlamp aim too high (1.8)

Brake pedal creeps down when held under pressure (3.3.B.1a)

Horn not working (1.6.2a)

Nearside Headlamp aim too high (1.8)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Power steering inoperative (2.3.3a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

all discs slightly worn

both front inner cv boots torn

front discs slightly distorted

general heavy under body corrosion

slight damage to drivers door mirror glass

Horn not working (1.6.2a)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Direction indicators incorrect colour (1.4.A.2f)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Towbar component excessively corroded (6.6.1)

Offside Steering rack gaiter split (2.2.D.2d)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

all discs slightly worn

both front inner cv boots torn

front discs slightly distorted

general heavy under body corrosion

slight damage to drivers door mirror glass

Offside Inner Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake disc slightly pitted (3.5.1h)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Nearside Registration plate lamp not working (1.1.5c)

Offside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Outer Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Registration plate lamp not working (1.1.5c)

Rear registration plate deteriorated (6.3.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Inner Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake disc slightly pitted (3.5.1h)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Fuel system component leaking (7.2.3)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim too high (1.8)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Power steering pipe(s) or hose(s) leaking from a joint (2.3.3b)

Power steering pipe(s) or hose(s) leaking from a seal (2.3.3b)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Track rod end ball pin shank loose (2.2.B.1c) DANGEROUS

Nail in nearside rear tyre

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

coil spring corroded (2.4.C.1b)

n/s windscreen damaged.n/s o/s rear brake hose ferrules corroded.o/s inner drive shaft gator torn.n/s o/s door mirrors tempery repair.body work corroded

Front registration plate missing (6.3.1a)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

n/s/r shock absorber dust cover corroded

spare tyre defective

Exhaust mounting missing (7.1.1b)

Front registration plate missing (6.3.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Registration plate lamp not working (1.1.5c)