MOT Status
ValidMileage
244,249 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Central Exhaust has a major leak of exhaust gases flexy pipe (6.1.2 (a))
Nearside Front Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting suspension out rigger corroded (6.2.2 (d) (i))
Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))
Nearside Rear Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring mounting (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting shock absorber inadiquite repaired (6.2.2 (d) (i))
Rear Exhaust has a major leak of exhaust gases silencer (6.1.2 (a))
Offside Rear Lower Anti-roll bar linkage pin or bush likely to become detached detatched (5.3.4 (a) (ii)) DANGEROUS
Nearside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength coil spring mounting (5.3.6 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive spring top (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring top (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring top (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive spring top (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring top (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring top (5.3.6 (a) (i))
Horn not working (7.7 (a))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Hole in inner sill
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Rear Suspension component corroded and seriously weakened Bump stop (5.3.3 (b) (i))
Offside Rear Suspension component corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Hole in inner sill
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front sill holed outside prescribed area
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
wiper linkage worn
Nearside Front Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded axle tie bar front mounting (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
wiper linkage worn
Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Rear fog lamp missing (1.3.2a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Statutory seat belt missing (5.1.1)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R254 JBA is a 2011 Mazda Bongo in White with a 2,500cc diesel engine. This vehicle has been through 26 MOT tests with a personal pass rate of 61.5%.
Across all 2011 Mazda Bongo models, the average MOT pass rate is 67.7% with a typical mileage of 134,509 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying R254 JBA, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 15 years old, this Mazda Bongo is still in the earlier part of its expected life.
Frequently Asked Questions
How do I check the history of R254 JBA?
You can check the full history of R254 JBA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R254 JBA registered?
R254 JBA is a 2011 Mazda Bongo, first registered on 1 February 2011.
Is R254 JBA safe to buy?
The MOT history for R254 JBA shows 26 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R254 JBA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R254 JBA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.