1997 Yamaha SR125

Front Wheel spoke excessively loose (4.2.1b)

Headlamp aim too high (1.6)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear suspension component excessively corroded. (2.4.A.1a)

Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. (2.4.A.2d)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

side stand spring poor condition

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

side stand spring poor condition

Drive chain worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)

Brake cylinder severely corroded (3.2.B1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear shock absorber has a light misting (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear shock absorber has a light misting (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Brake pedal cannot be released smoothly (3.1.3d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)